Spiral configured heat exchanger
model, proposed for development.
Below a physical prototype has been
worked out for efficient metal bending. The chief feature in this
process is the possibity of assembly with cement. Pictured below
is a workable prototype made by rolling aluminum as in the diagram
above and then sealing with (in this case) portland cement . This
process may also apply to thermoplastic construction. Participants
in developing this as a marketable product are welcome. Email
bo atkinson__ firstname.lastname@example.org
here to see a list of other enersearch pages
Note: These pages are placed in the public domain and are furnished "as is". The author assumes no responsibility for the use or misuse of the concepts in this series. All authorities should be satisfied first, as might be required, by relevant laws, before any building proceeds.
Searching Synergy ........ Free Exchange of Ideas
Enersearch was incorporated in 1980 but never materialized financially. A synergy of concepts were developed and are reflected in the pages of this series. The synergy continues as a single handed effort of Bo Atkinson, in Maine, USA.
Email comments welcome ~~~~~~~ email@example.com
Tel : 207 342 5796 . . . (Maine)